Description
A larger capacity tank than the standard 10 litre Truma at 13.5 litre this gives you more hot water per tank
Comes complete with everything you would need to install
Additional flue adaptor available (as extra) to allow you to use this as a replacement for the Carver Cascade 2
This high capacity water storage heater is available in two versions
- Standard Malaga – with an efficient gas burner
- Malaga E- which has the additional benefit of a 750 watt electric heating element.
Both heaters can provide a quick and efficient supply of hot water for showering and washing in touring and motor caravans
Features
-
Large 13 litre capacity “
for longer washing and showering facilities -
Efficient gas burner “
for faster warm up -
750W element on Malaga E
use on its own or with the gas burner for even faster hot water -
Small flue terminal
neat appearance outside the caravan -
Safe combustion
products are completely sealed from the caravan interior -
Easy to fit and service
all controls accessible at the rear of the unit -
Electronic control
turns on the heater at the flick of a switch and supervises burner operation -
Automatic resettable overheat cut out
-
Compact dimension
more room to route pipework and ducting where necessary
Technical:
- Weight (Empty) – 9.3Kg
- Tank Capacity – 13 litres
- Water temperature (thermostat setting) – 70°C
- Overheat Thermostat setting – 90°C
- Pressure relief valve settings – 3 bar
- Maximum working pressure – 2 bar
- Maximum working supply pressure – 1.9bar
- Heat input – 1.15kw 84g/h
- Pressure settings – Propane 37mbar – Butane 28mbar – Mixtures 30mbar
- Injector – Bray 960/40
- Gas connection 8mm O.D.
- Mains electric supply (G&E only) – 220/240v AC 50Hz Fused 5A