Description
The Truma Combi 2E is compact and powerful
The cheaper alternative to the ever popular combi 4e, this 2Kw output is ideal for use on panel vans
This combi boiler will run both the hot water & the warm air ducting through one unit
Gas & electric operation
The 10 litre water tank is operated by gas or mains (or both for faster heating times)
Heating comes with four separate outlets
Comes complete with Truma CP Plus digital wall mounted thermostat/control panel and flue kit
Please note – Truma do not supply the room sensor cable with their kits
The only thing not included is the ducting and outlets for the heating side – these are all available as a separate item
The ducting required is the 60/65mm and the outlets recommended are the Truma Butterfly Outlets
We also offer a 8m ducting kit which covers most “standard installations” Truma Combi Ducting Kit For Combi Boilers
Technical:
- Energy Source: LPG Buatne Or Propane Or 230V Mains
- Operating pressure: 2.75 kPa
- Rated Heat output in gas mode: max. 1950 W
- Rated Heat output in electric mode: 980w/1960W
- Rated heat output in mixed mode: max. 3900 W
- Fuel consumption: 130 g/h
- Power consumption (at 12v) operation of heater & water container: Max 5.6A for short periods (average approx 1.1A)
- Power consumption (at 12v): heating water container: Max 0.4 A
- Power consumption (at 230v): 4.1A/8.1A
- Air flow rate (free blowing) with 4 warm air outlets: max 287m3/h
- Quiescent current: approx 1 mA
- Water capacity: 10 litres
- Pump pressure: max. 280 kPa
- System pressure: max. 450 kPa
- Heating time (from approx 15 C to approx 60 C) water container: approx 23 min
- Heating time (from approx 15 C to approx 60 C) Heater and water container acc to EN 15033: approx 90mins
- Weight: 16.2Kg
- Dimensions: 510mm l x 450mm w x 300mm h
- Installation dimensions: 540mm l 500mm w 350mm h approx (minimum space required for the gas connection, water connections and drain valve)
**Final picture shows an example of a unit cut open just for demonstration purposes**
