NEW PRODUCT

Magnum Water & Heating Kit (With Truma Combi)

£1,696.85

Description

A kit put together by us here at Magnum Motorhomes that incorporates just about everything you would need to plumb in and heat your campervan

Ideally suited for a LWB high roof panel van conversions

This is a suggested kit that we would recommend and is a collection of parts often purchased by our customers doing van conversions

You can of course amend, add/remove any items you wish but this should just about get you all set up and it is good guide the items needed

The Truma combi boiler is a gas and mains electric  water heater and blow air heater all in one

Combined with the heating ducting pipe, outlets, Shurlfo pump, Fiamma on board water tank, pipes and fittings will get your van up and running

The Kit Consists Of
  • 1 x Fiamma Locking Filler Cap – External filler cap
  • 1 x Fiamma 70l On Board Water Tank – Ideal size for fitting under bench seats internally
  • 1m x 40m Filler Hose & 1m Breather Hose – For connecting the filler cap direct to the water tank
  • 1m x 1/2″ Water Hose Blue & 2 x Jubilee Clips – To connect form the water tank tot he pump
  • 1 x Shurflo 30PSI Pressure Water Pump
    • 1 x 1/2″ BSP – 12mm Adapter
  • 1 x Truma Combi 4e Boiler – Gas & Electric Water Heater (10 Litre capacity)
  • 8m x Truma Ducting Heating Pipe
  • 8 x Truma Heater Ducting Pipe Clips
  • 4 x Truma Butterfly Heating Outlets (black)
  • 10m x 12mm Push Fit Hose Blue
  • 10m x 12mm Push Fit Hose Red
  • 6 x 12mm Push Fit Tee’s
  • 6 x 12mm Push Fit Straights – To connect kitchen, bathroom & shower taps
  • 6 x 12mm Push Fit Elbows – General use
  • 1 x 12mm Push Fit – 3/8″ Flexi Adapter – To connect a plumbed in Thetford toilet to the push fit hose
  • 3 x Jubilee Clips – To connect hose form water tank to water pump & to use on the toilet connection

Please note: Taps are not included in the kit, as some appliances come with taps and some do not, so these can be added where necessary

Price Breakdown: