Sale!

Truma Combi D4E Diesel Combination Boiler

M4084

Original price was: £1,565.00.Current price is: £1,465.00.

In Stock

Description

Upgraded for June 2022

New features:

  • Truma iNet X Panel
  • Compact flexible flue
  • Frost control dump valve

Now a stock item for us here at Magnums

The Truma combi D4E is the diesel and electric version of the ever popular Truma Combi 4e

The diesel version is equipped with a high-quality burner. Therefore, it also heats reliably while driving

At the camp site, you can simply switch over to electrical mode and run the heater with the 230V power supply, with no need for the vehicle battery

Depending on the required output, choose between diesel, electric or mixed mode: in milder weather, set the appliance to electrical mode, on colder days to diesel mode and in extremely cold weather use mixed mode – diesel and electric heating.

Through four air outlets, the warm air flows into the vehicle where it is distributed optimally.

The powerful Combi D 4 E heats larger motor homes within a short time.

The appliance also has a 10-litre water tank, which is heated at the same time when hot water is required.

This means that you do not need an additional water heater, which saves space and weight.

The Combi heater is also very compact and offers many different installation options.

Technical:
  • Energy sources – Diesel as per EN 590
  • Rated heat output in gas mode – 2000 W / 4000 W
  • Rated heat output in electric mode – 900 W / 1800 W
  • Rated heat output in mixed mode – 
  • Fuel consumption – 220 – 630 ml/h (110 ml/h with average heat output of 1000 W)
  • Power consumption (at 12 V): operation of heater and water container – 1,8 – 4 A (in normal operation between “Off” and “lowest operating level” less than 1.8 A)
  • Power consumption (at 12 V): heating water container  – max. 1.8 A
  • Power consumption (at 230 V) – 3.9 A / 7.8 A
  • Air flow rate (free blowing) with 4 warm air outlets – max. 287 m³/h
  • Quiescent current – approx. 1 mA

*All appliances must be fitted by a qualified engineer*