Description
the Truma Combi 6e Gas & electric combination boiler now supplied with the Truma iNet X control panel.
The Truma iNet X is Truma’s next-generation control panel, allowing you to control your heating and cooling from your smartphone via Bluetooth. Replacing the original iNet, the Truma iNet X System controls your Truma campervan, caravan or motorhome appliances easily from your smart phone or tablet. All you need to do is download the free Truma iNet X App. The smart interface also allows you to control & check on the room temperature in your caravan or motor home.
Simply control your indoor climate and hot water and allows you to keep an eye on key status indicators.
Can you also link other appliances such as Truma Air Con units for example to the iNex X panel and take complete control.
The Truma combi 4e is a gas and mains 230v electric operated combination boiler that supplied you with 10 litres of stored hot water and is also a blow air heater system.
10 litre stainless steel water tank operated by gas or mains (or both for faster water heating times).
Heater comes from 4 separate outlets on the end of the boiler and can also be operated on mains, gas or both for a boost.
Combi 6 E uses very little electricity. The heater runs in gas mode for self-sufficient use, in electrical mode at the camp site and in mixed mode when outside temperatures are low. In summer, Combi 6 E heats just the water without running the space heater.
Like all Combi models, Combi 6 E also combines space and water heating in one appliance. The heater provides comfortable warmth in your vehicle in just a few minutes. It also heats the water that you need for showering, washing dishes or washing your hands.
And the best thing about it: you only have to install one appliance in your caravan or motor home.
This saves space and weight: as opposed to an S heater, there are no obstacles that you have to walk around in your vehicle.
Supplied as a install kit so all you need to add is the heater ducting and outlets, see suggest ducting kit kit below
Technical:
Operating pressure | 30 mbar |
Water capacity | 10 Litre |
Water pressure | max. 2,8 bar |
Heating time (from 15°C to 60°C): Water containe/Heater and Water containe |
Approx. 20 min./Approx. 80 min. |
Rated thermal output | 2000/4000/6000 W |
Rated thermal output in electrical operation | 900/1800 W |
Rated thermal output in mixed operation | max. 5800 W |
Fuel consumption | 160-460 g/h |
Air flow rate | Max. 287 m3/h |
Power consumption (at 12 V): Heating and Water containe operation |
0.2 A up to temporary max. of 5.6 A (average approx. 1.1 A) |
Power consumption (at 12 V): Heating up boiler | Max. 0,4 A |
Power consumption (at 230 V) | 3,9 A / 7,8 A |
Rest current | Approx. 0,001 A |
Frost control heating element (optional) | Approx.0,4 A |
Weight (without water) | 15,1 kg |
Dimensions (L x W x H) | 510 x 450 x 300 mm |
Part number | 33813-78BX/L |
**Final picture shows an example of a unit cut open just for demonstration purposes**