Victron SmartSolar MPPT 100/30 Solar Charge Controller SCC110030210



In Stock


A solar charger gathers energy from your solar panels, and stores it in your batteries.

Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time.

SmartSolar maintains battery health, extending its life.

The SmartSolar charge controller will even recharge a severely depleted battery.

It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

This listing is for the 100/30 Victron part number : SCC110030210

Suitable for use on 12v or 24v batteries

Has in built Bluetooth connectivity via the Victron App

IP43 rated

  • System voltage: 12V/24V autoselect
  • Max. rated charge current: 30A
  • Max. panel power: 440W (@12V) / 880W (@ 24V)
  • Charge voltage for 12V system: Absorption 14.4V / Float 13.8V (adjustable)
  • Charge algorithm: Multi-stage adaptive
  • Max. panel open circuit voltage: 100V
  • Max. panel short circuit current: 35A
  • Peak efficiency: 98%
  • Self power consumption for 12V system: 30mA
  • Max. cable size that fits terminals: 16mm²
  • Operating temp: -30 to +60°C
  • Overall dims: 186 (W) x 130 (H) x 70 (D) mm

Part Number:  SCC110030210

MPPT: Ultra Fast Maximum Power Point Tracking

By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.

Load output

The intelligent Load output function prevents damage caused by running batteries ‘flat’. You can configure the voltage at which SmartSolar disconnects a load – thereby preventing excessive drain on your batteries. And here’s the clever bit: SmartSolar will attempt a 100% recharge every day. If it can’t – during periods of poor weather – it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery.