Victron Energy Phoenix Pure Sine Wave Inverter 12/800 12v 800W PIN121801400



In Stock

SKU: M4684 Categories: ,


The Victron Phoenix range of inverters come highly recommended by Magnums

Inverters allow you to power domestic equipment – requiring 230V/120V AC – using leisure or automotive batteries rated at 12V, 24V or 48V DC.

Can be operated and monitored via Bluetooth using the Victron Energy App.

Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years.

The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

Fully configurable:
• Low battery voltage alarm trip and reset levels
• Low battery voltage cut-off and restart levels
• Dynamic cut-off: load dependent cut-off level
• Frequency 50 Hz or 60 Hz
• ECO mode on/off and ECO mode sense level
• In- and output voltage, % load and alarms

High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W).

Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.

LED diagnosis
Please see manual for a description.

DC connection with screw terminals
No special tools needed for installation

UK 3 pin output socket 
Supplied with single UK 3 pin AC outlet

Please note cables to connect leisure battery not supplied

  • Input voltage rating: 9.2 – 17.0VDC
  • Output voltage: 230VAC +/- 0.3%
  • Continuous AC power at 25°C: 800VA
  • Continuous power at 25°C/40°C: 650/560W
  • Peak power: 1500W
  • Max. efficiency: 89%
  • No-load power consumption: 5.6W
  • Default zero load power in ECO mode: 0.9W
  • Operating temperature: -40°C to +65°C (fan assisted cooling)
  • DC low shut down: 9.3V (adjustable)
  • Dynamic (load dependent) DC low shut down: Fully configurable
  • DC low restart and alarm: 10.9VDC (adjustable)
  • Battery charged detect: 14.0V (adjustable)
  • Cable connection: Screw clamp terminals (cable size 25mm² max.)
  • Output socket: BS1363 UK 3-pin socket
  • Remote On/Off connection: 2 pole connector
  • Ingress Protection rating: IP21
  • Body material: Steel with plastic cover (blue RAL5012)
  • Mounting holes:x4 on sides of chassis
  • Weight: 5.5kg
  • Overall dimensions: 325 (L) x 230 (W) x 105 (H) mm

Part Number:  PIN121801400