Description
This is a 2 part item that allows you to have an adjustable shower tray round your C220 toilets
*Please note this shower tray is designed to fit the new C223CS or the C224CW, it doe snot fit any of the C200 range
This consists of the C220 Surround Plate & Shallow Shower Tray 685mm x 550mm
You are able to trim surround plate so you can slide the toilet to one side and perhaps put along side a wheel arch for example
Both made form HIPPS plastic with a white gloss finish
These are separate items however there is a lip on both items to allow one to sit on top of the other
The back plate is the same width as the shower tray so it can be used as shown in photo 1 if required
You can trim either side of the C220 Surround plate so it can be used on either wall
The maximum you can cut off the C220 Surround Plate is 125mm form each side
MEASUREMENTS:
- As shown in photo 1 the overall width is 685mm (This can be trimmed ever so slightly)
- Overall length is 1060mm (This cannot be adjusted)
Please note all measurement are +/- 5mm as per the manufacturers tolerances
