We have dedicated this page to some of our CUSTOMER'S PROJECTS .
If you would like to submit your project for this page, please contact us.
As you can see from the great quality photos this conversion has been finished to a very high standard
A good combination of Maple and carpeted walls makes for a cosy rear seating area
The top locker curved doors used were a one off job lot, but are very similar to our current range but with different colour base trims
You can see the MDF edging profile in maple round the Maple boards to create a shower room door
Clever touches such as additional above locker lighting make the finish look very professional
Built to a high standard by one of our customers using our Amati Walnut range
You can see a good example of the knock in edging to make doors and trim up the furniture board
B&C Caravans are a local company who will repair caravans/motorhomes, fit you a window or build you a full conversion
This is an example of some removable furniture made for a classic Formula 1 carrier
Here you can see a great example of a luxury finish interior fit out using out Light oak furniture
You can also see the full effect of our curved locker doors, making the finish very professional
Seitz windows used throughout
Effective use of the DOT LED lights
This has been expertly converted by Regal Coachworks Ltd
Regal Coachworks Ltd design and build bespoke vehicles for their customers
Here is an example of one of their recent builds called Athena, using some of our products
Listed below are some of the items that we installed into this build
The vehicle above has been converted by one of our customers using many parts purchased from our store.
The customer has used the Maple furniture boarding, radius corners, edging profiles, knock in edgings and a variety of surplus doors
Balboa wallboard has been used on the walls and White Lopez on the roof
Externally there are Seitz S4 windows and a external main entry door.
Appliances on the inside include:
Again this has been constructed using almost everything from our warehouse.
The choice of colour is Maple furniture board, Maple radius corner, knock in edging and some surplus interior doors
The walls are in Balboa wall boarding, the ceiling is in Parva and garage area is lined in White Hard Glaze boarding.
On the exterior there are Seitz windows & Fiamma F45 awning
The bathroom area has a swivel shower tray, Thetford cassette toilet, Cleo tip up basin, Comet exclusive shower mixer tap and magnum raiser bar kit.
Appliances used are:
Appliances used but not shown are:
Almost everything in this vehicle was made from parts from our warehouse.
Externally Seitz windows were used.
Maple furniture boarding & trims together with some pre made surplus lockers doors
On the walls the chosen boarding was Balboa & Parva on the ceiling.
The fridge used is a RM4210
Behind the large door at the rear is a shower room constructed using Magnum shower room B
A customer's conversion using parts mainly sourced from us at Magnum Motorhomes.
The furniture is constructed from our Maple furniture boards & trims
The windows are Seitz S4 windows, various sizes.
They have also used a Waeco fridge, I believe a CR65
Other Appliances Used:
As you can see they have made the most of their layout and optimized space where possible, the build took roughly 5 months from start to finish a great example of what can be achieved.
Newly finished Fiat Ducato 3 Berth conversion.
Great finishes all round with a great example of what can be done with the rear doors.
Using carpet & off cuts of wallboard you can see how they have been able to finish the rear doors very nicely, they also applied this method to the sliding door.
Also the single seat you can see from the side door pulls out to make a single bed.
Internal appliances that you can see are:
All in all a very professional finish throughout, and another great example of what can be achieved.
Here we have a great example of what can achieved using our Light oak boards and trims.
The vehicle is a VW Crafter LWB high roof.
A really good example of how you can make your own doors any shape any size using the 12mm furniture board and our edging profile. You can see that the customer has mitered the corners of the edging profile to make a frame round the 12mm board and has made all locker doors including the bathroom door.
He has also used the edging profile to trim the interior frame of the widows, making everything match and look professional.
There is a nice bathroom at the rear but I could not get a good enough photo, but believe me behind the door is a nice spacious shower room area with toilet.
From the outside you can see he has used Seitz S4 windows
In the ceiling he has used Fri Light Nova LED lights, 6 in the living area and 2 in the shower room area.
Appliances on show are:
Everything else is neatly hidden away all controllable by a few switches and dials.
You can tell time has been taken to make sure the finish is pristine, and it shows.
A good combination of wall lining carpet and Maple trimming makes for a luxury interior finish.
Handy custom made shelving using maple boards and knock in edging.
Kitchen bottom doors also made from the Maple boarding with knock in edging.
In the rear they have used Seitz windows on the back doors and both side panels making panoramic views from the living area.
CBE sockets & switches and control panel used throughout giving a professional finish.